Use case | 4 laptops connected for BYOD and charging |
Ochno | 1 x O-PC-3, 4 x O-SWO-200-X sockets, 1 x O-SBC-200-1 adapter |
3rd party | Barco CX-50 Gen2 |
| Drawio | ||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LICENSES |
| REMARKS |
Hub management | - | |
NETWORK |
| REMARKS |
Network connection | - | |
FIRMWARE |
| REMARKS |
Firmware version | 1.6.1 | |
INTEGRATIONS |
| REMARKS |
Microsoft integration | - | |
Microsoft email | - | |
SWITCH SETTINGS | VALUE | REMARKS |
Default port | None | |
Automatically switch to port when connecting | - | |
Automatically switch to port when disconnecting | 1+2+3+4 | |
Ports that switch automatically | 1+2 | |
Disable port when it is not active | - | |
BUTTON SETTINGS |
| REMARKS |
Turning off active port with button switches to | None | |
Disable buttons for port | - | |
UC SYSTEM SETTINGS |
| REMARKS |
Configure US system | Disabled | |
Connect on USB-C port | - | |
Select profile | - | |
Buttons cycle through modes | - | |
Ports that start in UC mode | - | |
COMMUNICATION SETTINGS |
| REMARKS |
Turn screens on/off using HDMI CEC | Disabled | |
Video handshake profile | Advanced settings | |
HDMI setup | Delay 1000 | |
HPD setup | Always on | |
USB passthrough profile | Advanced settings | |
USB control | Delay 500 | |
USB power | Delay 500 | |
USB 3 protocol | Always on | |
USB 2 protocol | Delay 3000 |