...
NOTE! Which settings you can configure varies depending on which product you have and the firmware version.
Settings in detail
Default port
Which port the hub set as active when the hub starts up. Any port can be used. If you select None, there will be no active port as default. It is also used with other settings:
...
Disable buttons for port
When using Ochno buttons, this setting can disable the button for a specific port. If you set this, pushing the corresponding button will do nothing.
...
Examples
You have a video conference room with four cables. When you plug your computer in you just want it to work.
...
NOTE! For more MTR scenarios, see the support page about MTR configuration.
Terminology
Hub: The Ochno Power Conference.
Ports: The hub’s USB-C ports.
Active port: The port that is currently connected to the hub’s video and USB peripherals (passthrough). Only one port can be active at a time.
Button: Any kind of Ochno button, such as the Ochno LED Socket.
Device: Your computer, phone, tablet, or anything else that connects using the USB-C port.